Follow established safety rules and regulations and maintain a safe and clean environment.

Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.

Measure and mark cutting lines on materials, using a ruler, pencil, chalk, and marking gauge.

Erect scaffolding or ladders for assembling structures above ground level.; Assemble and fasten materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.; Construct forms or chutes for pouring concrete.

Shape or cut materials to specified measurements, using hand tools, machines, or power saws.

Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.

Verify trueness of structure, using plumb bob and level.

Construct forms or chutes for pouring concrete.

Cover subfloors with building paper to keep out moisture and lay hardwood, parquet, or wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.

Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.; Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools.; Examine structural timbers and supports to detect decay, and replace timbers as required, using hand tools, nuts, and bolts.

Inspect ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.; Examine structural timbers and supports to detect decay, and replace timbers as required, using hand tools, nuts, and bolts.

Finish surfaces of woodwork or wallboard in houses or buildings, using paint, hand tools, or paneling.

Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.; Install rough door and window frames, subflooring, fixtures, or temporary supports in structures undergoing construction or repair.

Install structures or fixtures, such as windows, frames, floorings, trim, or hardware, using carpenters' hand or power tools.; Install rough door and window frames, subflooring, fixtures, or temporary supports in structures undergoing construction or repair.

Maintain records, document actions, and present written progress reports.

Remove damaged or defective parts or sections of structures and repair or replace, using hand tools.

Select and order lumber or other required materials.

Work with or remove hazardous material.

Fill cracks or other defects in plaster or plasterboard and sand patch, using patching plaster, trowel, and sanding tool.

Anchor and brace forms and other structures in place, using nails, bolts, anchor rods, steel cables, planks, wedges, and timbers.

Prepare cost estimates for clients or employers.

Bore boltholes in timber, masonry or concrete walls, using power drill.

Install rough door and window frames, subflooring, fixtures, or temporary supports in structures undergoing construction or repair.

Dig or direct digging of post holes and set poles to support structures.

Dig or direct digging of post holes and set poles to support structures.

Apply shock-absorbing, sound-deadening, or decorative paneling to ceilings or walls.